Swinging Arm Bushes, Metalastic, Pair, Norton Dominator

Pair of metalastic type swinging arm bushes.

This type of bush allows rotation without any wear and is used extensively on many types of suspension.  The basic principle is that the outer sleeve is an interference fit in the housing (in this case the swinging arm), and the inner sleeve, which projects out at both ends, is locked to the stationary component (the frame) by the clamping effect of the spindle.  There is therefore no wear on the spindle or frame, as there should be no relative movement.

OD:  1-3/16″ with a bore to take a 1/2″ spindle/stud
Length of inner sleeve:  3-1/8″

For Norton Dominator and Atlas featherbed frame models.

Made in England.

067767, 20083